Designing a technical project of common telecommunications infrastructure
Otros Autores: | |
---|---|
Formato: | Libro electrónico |
Idioma: | Inglés |
Publicado: |
Jaén, España :
Editorial Universidad de Jaén
2020.
|
Colección: | Ingeniería y Tecnología.
|
Materias: | |
Ver en Biblioteca Universitat Ramon Llull: | https://discovery.url.edu/permalink/34CSUC_URL/1im36ta/alma991009435858306719 |
Tabla de Contenidos:
- DESIGNING A TECHNICAL PROJECT OF COMMON TELECOMMUNICATIONS INFRASTRUCTURE
- PÁGINA LEGAL
- FOREWORD
- REPORT
- 1.1 General Information
- 1.1.A details of the developer.
- 1.1.C Application of the Horizontal Property Law.
- 1.1.D Purpose of the Technical Project.
- 1.2 Elements OF the common telecommunication infrastructure
- 1.2.A Collection and distribution of terrestrial television and sound broadcasting.
- a) Design considerations
- b) Terrestrial sound and television broadcast signals received at the receiving antenna site.
- c) Selection of location and parameters of the receiving antennas.
- d) Calculation of the supports for the installation of the receiving antennas
- e) Frequency plan.
- f) Number of user sockets.
- 1.2.B Distribution of sound broadcasting and satellite television.
- 1.2.C Access and distribution of publicly available telephony service and broadband telecommunications services.
- 1.2.C.1) Distribution and dispersion networks.
- 1.2.C.2) Internal user networks.
- 1.2.D Digital Home Infrastructures.
- 1.2.E Conduits and distribution infrastructure.
- a) Considerations regarding the general building outline.
- b) Entry handhole box and external conduit.
- c) Lower and Higher Link Junction Boxes.
- d) Lower and Upper Link Conduits.
- e) Enclosure of telecommunication facilities:
- f) Main junction boxes.
- g) Main conduits and secondary junction boxes.
- h) Secondary conduit and pass-through junction boxes.
- i) Network termination junction boxes.
- j) Internal user conduit.
- This conduit houses the internal user network. It is made up of embedded tubes that join the NTJB with the different terminal access bases. This conduit will use a star topology, and the diameter of the tubes will be:
- k) Socket fixtures.
- l) Summary table of required materials:
- 1.2.F Others.
- Plans.
- Specifications
- 3.1 Special conditions
- 3.1.A Sound broadcasting and television.
- a) Access conditions to the capture systems.
- b) Features of the capture systems.
- c) Features of the active elements.
- d) Features of the passive elements.
- 3.1.B Distribution of publicly available telephony and broadband telecommunications services.
- a) Pairs or twisted pair networks.
- b) Coaxial cable networks.
- c) Optical fiber cable networks.
- 3.1.C Digital home infrastructures (when included in the project).
- 3.1.D Infrastructure.
- a) Condition to be taken into account for its location.
- b) Features of the handholes.
- c) Features of external, link, main, secondary and internal user conduits.
- d) Conditions to be taken into account in the internal distribution of ETFs. Installation and location of the different equipment.
- e) Features of the link, secondary, pass, network termination and user socket junction boxes.
- 3.1.E Tables of measures.
- a) Table of measures to be met in terrestrial television user sockets, including also the margin of the radio spectrum between 950 MHz and 2150 MHz.
- b) Table of measurements of public available telephony and broadband telecommunications networks.
- 3.1.F Use of non-common elements of the building or set of buildings (if any).
- 3.1.G Estimation of the waste generated by the installation of CTI.
- 3.1.H Complementary specifications of the facility
- a) Related to mechanical aspects
- b) Related to constructive aspects
- c) Firewalls
- d) Electrical assembly, protection, security and connection
- e) Installation of equipment and cautions to be taken into account
- 3.2 General conditions
- 3.2.A Regulation of CTI and annex standards.
- 3.2.B Current Regulation on the Prevention of Occupational Risks.
- 3.2.C Regulations on protection against electromagnetic fields.
- 3.2.D Secrecy of communications.
- 3.2.E Regulation on waste management.
- 3.2.F Fire protection regulations.
- 3.2.G Compliance with regulations of the Autonomous Community.
- 3.2.H Specification of compliance with local regulations.
- ANNEX ON HEALTH AND SAFETY CONDITIONS
- ANNEX ON HEALTH AND SAFETY CONDITIONS
- I. APPLICABLE LEGAL PROVISIONS
- II. SPECIFIC HEALTH AND SAFETY CHARACTERISTICS TO BE TAKEN INTO ACCOUNT IN THE COMMON TELECOMMUNICATION INFRASTRUCTURE TECHNICAL PROJECT
- 1.1 Installation of the infrastructure outside the building
- 1.2 Installation of the infrastructure inside the building
- 2) INSTALLATION OF THE CAPTURING ELEMENTS, THE HEADER EQUIPMENT, AND LAYING AND CONNECTINg THE CABLES AND PANELS of THE DIFFERENT NETWORKS
- 2.1. Collection element Installation
- 2.2. Electrical installations in the enclosures of telecommunication facilities, cables connection and power strips
- 2.3 Installation of the header equipment and the main junction boxes.
- 2.4 Laying and connecting of the cables and strips of the different networks.
- ANNEX ON WASTE MANAGEMENT
- ANNEX ON WASTE MANAGEMENT
- 1. ESTIMATION OF THE QUANTITY OF RESIDUES GENERATED AND THEIR CODIFICATION
- 2. MEASURES FOR THE PREVENTION OF WASTE IN THE WORK OBJECT OF THE PROJECT
- 3. OPERATIONS OF REUSE, RECOVERY OR DISPOSAL TO WHICH THE WASTE THAT IS GENERATED IN THE WORK WILL BE DESTINED
- 4. WASTE SEPARATION MEASURES AS PER R.D. 105/2008 ARTICLE 5, POINT 5.
- 5. PLANS OF THE FACILITIES PLANNED FOR THE WASTE HANDLING.
- 6. SPECIFIC TECHNICAL REQUIREMENTS
- 7. COST ASSESSMENT OF MANAGING THE WASTE GENERATED.
- Budget and Measures
- BUDGET AND MEASURES
- 1 INFRASTRUCTURES AND SUPPLY, DISTRIBUTION AND DISPERSION NETWORKS
- 1.1 RTV networks
- 1.1.1 RTV signal reception
- 1.1.2 RTV header system
- 1.1.3 RTV distribution network.
- 1.1.4 RTV dispersion network
- 1.2 Twisted pair networks
- 1.2.1 Distribution and dispersion networks. Interconnection point
- 1.3 Coaxial cable networks
- 1.3.1 Distribution and dispersion networks. Interconnection point
- 1.4 Optical fiber network
- 1.4.1 Distribution and dispersion networks. Interconnection point
- 1.5 Infrastructures
- 1.5.1 Infrastructures for supply networks
- 1.5.2 Infrastructures for distribution and dispersion networks
- 1.6. Partial summary
- 2 INFRASTRUCTURES AND INTERNAL USER NETWORKS
- 2.1 Internal network (RTV)
- 2.1.1 User access point (RTV)
- 2.1.2 User socket and RTV user's network
- 2.2 Internal network (twisted pair)
- 2.2.1 User access point (twisted pair)
- 2.2.2 User sockets and cable network of twisted pairs
- 2.3 Internal network (coaxial)
- 2.3.1 User access point (coaxial network)
- 2.3.2 User socket and coaxial cable network
- 2.4 Network termination point (OF)
- 2.4.1 User access point (of network)
- 2.5 Infrastructures
- 2.5.1 Internal conduit (RTV)
- 2.5.2 Internal conduit (twisted pair)
- 2.5.3 Internal conduit (coaxial)
- 2.5.4 Network termination junction boxes
- 2.6. Partial summary
- 3 SUMMARY
- Bibliography
- BIBLIOGRAPHY.