“…GEOTRAP is the OECD/NEA Project on Radionuclide Migration in Geologic, Heterogeneous Media carried out in the context of site evaluation and safety assessment of deep repository systems for long-lived radioactive waste.Performance assessment of proposed waste disposal sites requires models of radionuclide transport through the geosphere. …”

Tabla de Contenidos: “…Optimisation of a Code to Improve Spallation Yield Predictions in an ADS Target System -- Summary of Working Group Discussion on Accelerators -- ADS Accelerator Reliability Activities in Europe -- Research on the Accelerator-Driven Subcritical Reactor at the Kyoto University Critical Assembly (KUCA) with an FFAG Proton Accelerator -- Summary of Working Group Discussion on Subcritical Systems and Interface Engineering -- CFD Analysis on the Active Part of Window Target Unit for LBE-Cooled XADS -- Summary of Technical Session V -- Summary of Technical Session IV -- Status of the Megapie Project -- Status of the Trade Experiment -- Summary of Technical Session III -- The European Project PDS-XADS “preliminary Design Studies of an Experimental Accelerator-Driven System” -- Primary Isotopic Yields for MSDM Calculations of Spallation Reactions on 208Pb with Proton Energy of 1 GeV -- Research and Development on Accelerator-Driven Systems -- Introduction of a Dual Injection Tube for the Design of a 20 MW Lead-Bismuth Target System -- Design Study around Beam Window of ADS -- The Vacuum Interface Compatibility Experiment Vice Supporting the MYRRHA Windowless Target Design -- Thermal Stability of the U-Zr Fuel and its Interfacial Reaction with Lead -- Summary of Technical Session I -- Background/perspective -- Accelerator-Driven Systems in Advanced Fuel Cycles -- Corrosion Tests in the Static Condition and Installation of Corrosion Loop at KAERI for Lead-Bismuth Eutectic -- Status of the Spallation Neutron Source Accelerator Complex -- Vacuum Gas Dynamics Investigation and Experimental Results on the Trasco ADS Windowless Interface -- Application of the Hyper System to the DUPIC Fuel Cycle -- Research and Development on Lead-Bismuth Technology for Accelerator-Driven Transmutation Systemat JAERIi -- Concept of Transmutation Experimental Facility -- Methods and Codes for Estimation of Tolerance -- Experimental Verification of Selected Transmutation Technology and Materials for Basic Components of a Demonstration Transmuter with Liquid Fuel Based -- Executive Summary -- On the Supplementary Feedback Effect Specific for Accelerator-Coupled Systems ACS -- French Accelerator Research for ADS Developments -- An Improved Superconducting ADS Driver Linac Design -- Keff and Ks Burn-up Swing Compensation in MYRRHA -- Hybrid Power Extraction Reactor Hyper Project -- Construction of a FFAG Complex for ADS Research in KURRI -- Analysis of Lead-Bismuth Eutectic Flowing into Beam Duct -- Improvement of Reliability of the Trasco Intense Proton Source Trips at INFN-LNS -- Present Status of the J-PARC Accelerator Complex -- High-Energy Beat Transport Lines and Delivery System for Intense Proton Beams -- Comparative Transient Analysis of Pb/Bi and Gas-cooled XADS Concepts -- Thermal-Hydraulic Experiments on the Tall LBE Test Facility -- R&D of ADS in Japan -- Comparative Transient Analyses of Accelerator-Driven Systems with Mixed Oxide and Advanced Fertile-Free Fuels -- Los Alamos Perspective on High-Intensity Accelerators -- Beam Dynamics Studies for the Fault Tolerance Assessment of the PDS-XADS Linac -- Spoke Cavities -- Development of a Superconducting Proton Linac for ADS -- Chinese Status of HPPA Development -- Safety Analysis of the EU PDS-XADS Designs -- CFD Analysis of the Heavy Liquid Metal Flow Field in the MYRRHA Pool -- The PDS-XADS Reference Accelerator -- Results of the Second Phase of Calculations Relevant to the WPPT Benchmark on Beam Interruptions -- Estimation of Some Characteristics of the Cascade Subcritical Molten Salt Reactor CSMSR -- Annex 2 List of Participants -- Technological Aspects and Challenges for High-Power Proton Accelerator-Driven System Application -- Summary of Working Group Discussion on Safety and Control of ADS -- ADS Neutronics -- Status of the Conceptual Design of an Accelerator and Beam Transport Line for Trade -- ADS Safety…”

“…Process optimization is the method of choice for improving the performance of industrial processes, while enforcing the satisfaction of safety and quality constraints. Long considered as an appealing tool but only applicable to academic problems, optimization has now become a viable technology. …”

“…Various potential risks of sudden water pollution accidents are distributed along the long canal, which may result in huge losses and endanger the safety of water supply. In order to provide technical support for emergent operations in the MRP, the emergency operation technologies for sudden water pollution accidents were developed. …”

Tabla de Contenidos: “…""Title page""; ""Table of Contents""; ""Copyright""; ""Foreword""; ""Preface""; ""About the Authors""; ""Acknowledgments""; ""Part I: Getting Your Ducks in a Row""; ""Chapter 1: Definitions, Statistics, and the Occupational Safety and Health Administration""; ""Abstract""; ""Workplace Violence Is Not a Crime""; ""Reporting at the Federal Level""; ""OSHA's Role""; ""OSHA Workplace Violence Inspections""; ""OSHA Risk Factors""; ""OSHA Fines and Lawsuits""; ""What Every Company Should Do""; ""Chapter 2: The Need for a Violence Prevention Program""; ""Abstract""; ""Avoidance of Legal Liability""…”

“…This research is strongly driven by the growing need for radiation hardened electronics for space applications, high-energy physics experiments such as those on the large hadron collider at CERN, and many terrestrial nuclear applications, including nuclear energy and safety management. With the progressive scaling of integrated circuit technologies and the growing complexity of electronic systems, their ionizing radiation susceptibility has raised many exciting challenges, which are expected to drive research in the coming decade. …”

Tabla de Contenidos: “…Mission-oriented innovation policy: the case of the Swedish "Vision Zero" approach to traffic safety -- Index…”

“…The tax burden in Korea is among the lowest in the OECD area, mainly reflecting that the social safety net is at an early stage of development. The low tax burden implies limited tax induced economic distortions but as expenditure pressures will mount in the future, neutrality and efficiency of the tax system will have to be substantially improved if more sizeable deadweight losses are to be avoided. …”

“…Topics will also cover initial results addressing the needs of the upcoming wave of autonomous systems incorporating learning-enabled components that demand a tighter integration of design-time methods and tools into operation, as well as novel verification methods given the intrinsic limitation of learning approaches when it comes to safety guarantees…”

Tabla de Contenidos: “…-- 2 Where to Obtain Tools and Parts -- 3 Safety -- 4 Digital Multimeter -- 5 Numbers and Units -- 6 Robot Line-Following -- 7 Nine-Volt Batteries -- 8 Clips and Test Leads -- 9 Resistors -- 10 LEDs -- 11 Power On! …”

“…While exploring every feature of the game, you’ll need to make sure your basics are taken care of: safety, food, and storage. And above all, you’ll incorporate style and your own personal flair. …”

“…While exploring every feature of the game, you’ll need to make sure your basics are taken care of: safety, food, and storage. And above all, you’ll incorporate style and your own personal flair. …”

“…Performance specifications for customer aircraft, such as manoeuvrability, fuel consumption, maintenance, safety and testability, have become ever more demanding with each generation of equipment. …”

Tabla de Contenidos: “…5 Results and Discussion -- 6 Conclusion -- References -- Approach for Evaluating Changeable Production Systems in a Battery Module Production Use Case -- 1 Introduction -- 2 Industry Survey -- 2.1 Survey Structure -- 2.2 Survey Results -- 3 State of the Art -- 4 Method -- 5 Battery Module Production Use Case -- 6 Summary and Outlook -- References -- Cost-Minimal Selection of Material Supply Strategies in Matrix Production Systems -- 1 Introduction -- 2 State of the Art -- 2.1 Material Supply and the Selection Process of Supply Strategies -- 2.2 Challenges to the Material Supply in Matrix Production -- 2.3 Cost Accounting in the Context of Logistics -- 2.4 Algorithms -- 3 Method for Cost-Minimal Material Supply Strategy Selection -- 3.1 Structure of Method -- 3.2 Cost Side Description of Alternative Supply Strategies -- 3.3 Selection of the Most Cost-Effective Material Supply Strategy in Matrix Production System -- 4 Summary and Outlook -- References -- Assessment of Ergonomics Risk Experienced by Welding Workers in a Rail Component Manufacturing Organization -- 1 Introduction -- 2 Methods and Materials -- 3 Results and Interpretation -- 4 Conclusion -- References -- A Survey of Smart Manufacturing for High-Mix Low-Volume Production in Defense and Aerospace Industries -- 1 Introduction -- 2 Manufacturing Strategies for HMLV in Defense and Aerospace Industries -- 2.1 Major Issues -- 2.2 Advanced Processing Techniques -- 2.3 Make-to-X Strategy -- 2.4 Group Technology -- 2.5 Lean Practices -- 3 A Smart Manufacturing Solution -- 3.1 Automation in Manufacturing -- 3.2 Smart Production Planning and Control -- 4 Concluding Remarks -- References -- Feasibility Analysis of Safety Training in Human-Robot Collaboration Scenario: Virtual Reality Use Case -- 1 Introduction -- 2 Related Work -- 2.1 Virtual Reality Training -- 2.2 Virtual Reality Safety Training…”

“…Coverage includes smart instrumentation, DAQ, crucial health and safety considerations, and practical issues such as noise reduction, maintenance and testing. …”

“…However, the chemical pesticides have toxic effects on several non-target species and the growing environmental concerns raises the issues of safety and evaluation of toxicity. In this book the effects of chemical pesticides on fishes, earthworms, beneficial microbes and natural enemies in agricultural ecosystems are discussed. …”

“…The novel space tourism business, indeed, will benefit from their safety and lower recurrent development costs. The subjects addressed in the book include the cutting edge technology employed to push forward this relatively new propulsion concept, spanning systems to improve fuel regression rate, control of the mixture ratio to optimize performance, computational fluid dynamics applied to the simulation of the internal ballistics, and some other novel system applications…”

“…As readers will see, this Special Issue reinforces the high prevalence of vitamin deficiency and insufficiency in the general population and supports the safety of this low-cost molecule, revealing new perspectives regarding the extra-skeletal effects of vitamin D.…”

“…In this framework, this Special Issue collects research studying several materials and methods related to the antibacterial properties of surfaces for different applications and discussions about the environmental and human-safety aspects…”

“…The aim of resilience engineering and of this volume is to describe how safety can change from being protective to become productive and increase the number of things that go right by improving the resilience of the system…”