Proceedings of the XV Ibero-American Congress of Mechanical Engineering Cibim 22 / Cibem 22.
Autor principal: | |
---|---|
Otros Autores: | |
Formato: | Libro electrónico |
Idioma: | Inglés |
Publicado: |
Cham :
Springer International Publishing AG
2023.
|
Edición: | 1st ed |
Ver en Biblioteca Universitat Ramon Llull: | https://discovery.url.edu/permalink/34CSUC_URL/1im36ta/alma991009763134406719 |
Tabla de Contenidos:
- Intro
- Preface
- Organization
- Contents
- Mechanics
- Bayesian Inversion of a Non-linear Dynamic Model for Stockbridge Dampers
- 1 Introduction
- 2 Methodology
- 2.1 Experimental Test-Rig
- 2.2 Brief Description of the Predictive Deterministic Model
- 2.3 Brief Description of the Stochastic Approach
- 3 Casuistic Study and Results
- 4 Conclusions
- References
- Study and Optimization of a Numerical Algorithm for Hydrodynamic Lubrication Problems with Cavitation
- 1 Introduction
- 2 Methodology
- 2.1 Method of Characteristics
- 2.2 Bermúdez-Moreno Algorithm
- 2.3 Mass Conservation
- 3 Results
- 3.1 Model Validation
- 3.2 Convergence Study
- 3.3 Mass Conservation Study
- 4 Conclusions
- References
- Wake Interactions in an Asymmetric Binary Cylinder System in the Subcritical - Supercritical Regime
- 1 Introduction
- 2 Methodology
- 2.1 Water Tank
- 2.2 Wind Tunnel
- 3 Results
- 3.1 Single Cylinder
- 3.2 Binary System Wakes Measured in Water
- 3.3 Binary System Wakes Measured in Wind Tunnel
- 4 Conclusions
- References
- Contribution to Mathematical Modeling and Numerical Simulation of Welding Processes
- 1 Introduction
- 1.1 Welding Problem
- 2 Mathematical Modeling
- 2.1 Equations of Conservation of Mass and Momentum
- 2.2 Equation of Energy Conservation
- 3 Numerical Method
- 4 Results
- 5 Conclusions
- References
- Dimensionless Coefficients for Validation and Evaluation of a CFD Methodology Applied to a H-Darrieus Vertical Axis Wind Turbine
- 1 Introduction
- 2 Methodology
- 2.1 Computational Domain
- 2.2 Spatial Discretization
- 2.3 Modelling setup
- 3 Results and Discussion
- 4 Conclusions
- References
- Changes in Hardness and Volume of Polymers in Contact with Lubricants Used in Electric Vehicle Transmissions
- 1 Introduction
- 2 Materials y Methods
- 2.1 Materials.
- 2.2 Aging of Materials
- 2.3 Materials Characterization
- 2.4 Complementary Tests
- 3 Results
- 3.1 Volume Variation
- 3.2 Hardness Variation
- 3.3 Complementary Tests
- 4 Conclusions
- References
- Calculation of Williams-Landel Ferry Shift Factors via Probe Tack Testing for Uncured Prepreg Materials
- 1 Introduction
- 2 Method
- 2.1 Materials
- 2.2 Differential Scanning Calorimetry
- 2.3 Rheology
- 2.4 Adhesion Tests
- 3 Results
- 3.1 DSC
- 3.2 Rheology
- 3.3 Adhesion Tests
- 4 Conclusions
- References
- Modal Analysis of a 2R Flexible Platform Using Screw Theory
- 1 Introduction
- 2 Beam Element Derivation Using Screw Theory
- 3 Modal Analysis
- 4 Conclusions
- References
- OpenBeam: Off-Line and On-Line Tools to Solve Static Analysis of Mechanical Structures
- 1 Introduction
- 2 Methods
- 2.1 Direct Stiffness Matrix Method
- 2.2 Distributed Loads
- 2.3 Meshing
- 2.4 Eigen3 Library
- 2.5 MRPT-opengl Library
- 2.6 Emscripten
- 3 Results
- 3.1 The Openbeam C++ Library
- 3.2 Implemented Finite Elements
- 3.3 YAML Structure Definition Language
- 3.4 Applications
- 4 Conclusions
- References
- Failure Analysis of a Conveyor Belt Rail (Tripper) of Mineral
- 1 Introduction
- 2 Results and Analysis
- 2.1 Visual Inspection
- 2.2 Chemical Composition Analysis
- 2.3 Hardness Measurement
- 2.4 Metallographic Analysis
- 2.5 Micro Hardness Measurement
- 3 Conclusions
- References
- Vibration Analysis in Agricultural Vehicles for Fault Detection
- 1 Introduction
- 2 Methodology
- 2.1 Decision Tree
- 2.2 Obtaining Features
- 2.3 Extracted Characteristics
- 3 Results
- 3.1 Feature Analysis
- 4 Conclusion
- References
- Collaborative Project to Improve Teaching of Cams' Kinematic and Dynamic Analysis Using Spreadsheets
- 1 Introduction
- 2 Theoretical Basis on the Calculation of Cams.
- 2.1 Introduction, Working Principle, and Applications
- 2.2 Terminology and Classification of Cam Systems
- 2.3 Fundamental Law of Cam Design and Kinematic Diagrams
- 2.4 Follower Displacement Math Functions
- 2.5 Cam Size
- 3 Cam Profile Analysis and Design Validation
- 4 Computer Application Design
- 4.1 First Part: Kinematic Analysis
- 4.2 Second Part: Dynamic Analysis
- 4.3 Spreadsheets of Results
- 4.4 Technical Manual
- 5 Conclusions
- References
- Thermo-mechanical Stress Modeling of La(Fe,Co,Si)13 Thin Films Deposited on Porous Structures
- 1 Introduction
- 2 Computational Methods
- 2.1 Mathematical Model
- 2.2 Initial and Boundary Conditions
- 3 Results and Discussion
- 4 Conclusions
- References
- Isolation and Characterization of Crystalline Cellulose Nanofibers (CNF'S) from Guadua Angustifolia Kunth (GAK)
- 1 Introduction
- 2 Materials and Methods
- 2.1 Materials
- 2.2 Isolation of CNF'S
- 3 Characterization of Microfibers and Nanofibers
- 3.1 Atomic Force Microscopy (AFM)
- 3.2 Fourier Transform Infrared Spectroscopy (ATR-FTIR)
- 3.3 Thermogravimetric Analysis (TGA)
- 3.4 X-Ray Diffraction (XDR)
- 4 Results and Discussion
- 4.1 Morphology of CNFs
- 4.2 Removal of Non-cellulosic Elements (ATR-FTIR)
- 4.3 Thermogravimetric Analysis
- 4.4 Crystallinity Index (CrI)
- 5 Conclusions
- References
- Research into Novel Coatings on Composites and Technical Polymers, with Tailored Functionalities for the Transport and Biomedical Industries
- 1 Introduction
- 2 Methodology
- 2.1 Wire Arc Spray Process
- 2.2 Pre-treatment Selection
- 2.3 Pre-treatment Execution
- 3 Results
- 3.1 Mechanical Pre-treatment (Sand Blasting)
- 3.2 Laser Pre-treatment
- 3.3 Adhesion Test Results
- 4 Conclusions
- References
- Development of Virtual Tools for the Validation Study of Rigid Catenary Installations.
- 1 Introduction
- 2 Normative Framework
- 3 Simulation Tools Utility
- 4 Model Development for OCR
- 5 Model Validation
- 6 Conclusions
- References
- Assessment of Lower Limb Muscle Activation During Gait Assisted by a Cable-Actuated Exoskeleton
- 1 Introduction
- 2 Materials and Methods
- 2.1 Experimental Data
- 2.2 Dynamic Simulation
- 3 Results
- 3.1 Muscle Activations
- 3.2 Metabolic Cost
- 4 Discussion
- 5 Conclusion
- References
- Development of a Modular Test Bench for Cable-Driven Synergy-Based Exosuit Actuation and Control Strategies
- 1 Introduction
- 2 Methodology
- 2.1 Test Bench Design Theory
- 2.2 Construction of the Test Bench and its Modules
- 3 Tests Conducted
- 3.1 Motor Position Control
- 3.2 Analysis of Synergy Based Actuation Strategies
- 4 Results and Discussion
- 4.1 Adjusting Motor Position Control Parameters
- 4.2 Analysis of Synergy-Based Actuation
- 5 Conclusions
- References
- Biomechanical Study of the Addition of the Interferential Screw in the Repair of the Distal Biceps Brachii Tendon
- 1 Introduction
- 2 Methodology
- 2.1 Materials
- 2.2 Testing Protocol
- 2.3 Data Analysis
- 3 Results
- 4 Conclusions
- References
- Analysis of the Dorsolateral Prefrontal Cortex MNI Coordinates
- 1 Introduction
- 1.1 Dorsolateral Prefrontal Cortex (DLPFC)
- 1.2 Localization methods for DLPFC
- 2 Methodology
- 3 Results
- 3.1 Coordinates in MNI of the DLPFC
- 4 Conclusions
- References
- Vehicle Engineering
- Predictive Methodology to Optimize Knocking Behavior in the Transformation of Engines to Gaseous Fuels
- 1 Introduction
- 2 Methods and Materials
- 2.1 Materials
- 2.2 Methodology
- 3 Results
- 3.1 Knocking Zone
- 3.2 Experimental Results
- 4 Conclusions
- References
- Automatic Sight Distance Estimation for Overtaking Maneuvers
- 1 Introduction
- 2 Method
- 3 Results.
- 4 Conclusions
- References
- Assessing a Deterministic Model for Autonomous Driving Through Visual Behavior
- 1 Introduction
- 2 Driving Model
- 3 Experiments
- 3.1 Participants
- 3.2 Instrumentation
- 3.3 Procedure
- 4 Results
- 5 Conclusions
- References
- Tubular Structure of an Urban Electric Vehicle with High Crashworthiness Performance
- 1 Introduction
- 2 Methodology
- 2.1 Torsional and Bending Stiffness
- 2.2 Durability Tests
- 2.3 Crashworthiness Performance
- 3 Results
- 3.1 Torsional and Bending Stiffness
- 3.2 Durability Tests
- 3.3 Crashworthiness Performance
- 4 Conclusions
- References
- On the Use of Carbon Fiber Composites for the Enhancement of the Rollover Resistance of Steel Buses
- 1 Introduction
- 2 Methodology
- 2.1 Bending Collapse Experimental Setup
- 2.2 Concept Modeling of the Structure
- 3 Results
- 4 Conclusions
- References
- Numerical-Experimental Analysis of the Sealing Efficiency Utilizing Stresses Produced to an Engine Gasket Manufactured by CRS of ¼ Hardness with a Nitrile Coating on Both Sides
- 1 Introduction
- 2 Methodology for Performing Thermal Analysis
- 3 Solution and Results of Static Analysis with Thermal Loads
- 4 Conclusions
- References
- Low-Cost Model for the Estimation of Pollutant Emissions Based on GPS and Machine Learning
- 1 Introduction
- 2 Materials and Methods
- 2.1 Proposed Methodology
- 2.2 Data Collection in Real Driving Conditions
- 2.3 Test Routes
- 2.4 Estimation of Pollutants
- 3 Conclusions
- References
- Energy and Thermal Engineering
- Development of a Reactor Network Model to Predict Pollutant Emissions from Aviation Gas Turbines
- 1 Introduction
- 2 Methodology
- 3 Results
- 4 Conclusions
- References
- Electricity and Hydrogen Generation from Food and Vegetable Wastes - Technical and Economic Analysis
- 1 Introduction.
- 2 Methodology.