Mechanics of Solids, 2nd Edition
Mechanics of Solids is designed to fulfill the needs of the mechanics of solids or strength of materials courses that are offered to undergraduate students of mechanical, civil, aeronautics and chemical engineering during the second and third semesters. The book has been thoroughly revised with mult...
| Otros Autores: | |
|---|---|
| Formato: | Libro electrónico |
| Idioma: | Inglés |
| Publicado: |
Pearson India
2011.
|
| Edición: | 2nd edition |
| Ver en Biblioteca Universitat Ramon Llull: | https://discovery.url.edu/permalink/34CSUC_URL/1im36ta/alma991009628051406719 |
Tabla de Contenidos:
- Cover
- Preface to the Second Edition
- Preface to the First Edition
- Contents
- About the Author
- Chapter 1: Analysis of Stress
- 1.1 Introduction
- 1.2 Classification of Load
- 1.3 Stress
- 1.4 Concept of Stress at a Point
- 1.5 State of Plane Stress
- 1.6 Principal Stresses
- 1.7 Mohr's Circle
- 1.8 Stress Concentration
- Problems
- Objective Questions
- Answers
- Chapter 2: Analysis of Strain
- 2.1 Concept of Strain
- 2.2 Direct and Shearing Strain
- 2.2.1 Shearing Strain
- 2.3 State of Strain at a Point
- 2.4 State of Plane Strain
- 2.5 Strain Gauge
- 2.6 Strain Gauge Application
- Problems
- Objective Questions
- Answers
- Chapter 3: Stress-Strain Relationship
- 3.1 Hooke's Law
- 3.2 Three Dimensional Hooke's Law
- 3.3 Stress-Strain Relationships for Plane Stress
- 3.4 Stress-Strain Relationships for Plane Strain
- 3.5 Bulk Modulus
- 3.6 Relation Between E and G
- 3.7 Generalized Hooke's Law
- 3.8 Relationship Among Elastic Constants for an Isotropic Homogeneous Elastic Material
- Problems
- Objective Questions
- Answers
- Chapter 4: Axial Loading
- 4.1 Introduction
- 4.2 Stress and Strain Under Axial Load
- 4.3 Static Properties of Materials
- 4.4 Elastic Stress-Strain Relationship
- 4.5 Mechanical Strengths
- 4.6 Strain Hardening
- 4.7 Yielding, Yield Strength and Proof Stress
- 4.8 Fracture Mode
- 4.9 Strain Energy
- 4.10 Resilience and Toughness
- 4.11 Deformation of Axially Loaded Members
- 4.12 Bars of Varying Cross-Section
- 4.13 Factor of Safety
- 4.14 Temperature Effects
- 4.15 Statically Indeterminate Axially Loaded Members
- 4.16 Composite Bars
- Problems
- Objective Questions
- Answers
- Chapter 5: Thin-Walled Pressure Vessels
- 5.1 Introduction
- 5.2 Stresses in Thin Cylinders
- 5.3 Strain and Change in Volume
- 5.4 Strengthening of Thin Cylinders.
- 5.4.1 Strapped Cylinder
- 5.4.2 Wire Winding
- 5.4.3 Laminated Cylinder
- 5.5 Joints in Cylinders
- 5.6 Thin Spherical Shell
- 5.7 Volume Change in Spherical Shell
- Problems
- Objective Questions
- Answers
- Chapter 6: Torsion
- 6.1 Torsional Shearing Stress and Strain
- 6.1.1 Torsional Displacements
- 6.1.2 Shearing Stress
- 6.2 State of Stress at a Point in a Shaft
- 6.3 Power Transmission
- 6.4 Composite Shafts-Series Connection
- 6.5 Statically Indeterminate Torsion Members
- 6.6 Strain Energy in Torsion
- 6.7 Torsion of Thin Walled Tubes
- 6.7.1 Angle of Twist for thin Walled Member
- 6.8 Torsion of a Tapered Shaft
- 6.9 Combined Axial and Torsional Load
- 6.10 Flanged Coupling
- Problems
- Objective Questions
- Answers
- Chapter 7: Beams and Bending-Shear Force and Bending Moment
- 7.1 Classification of Beams
- 7.2 Shear Force and Bending Moment in a Beam
- 7.3 Concept of Bending Stress
- 7.4 Signs for Shearing Force and Bending Moment
- 7.5 Shearing Force and Bending Moment Equations
- 7.6 Shear Force and Bending Moment Diagrams
- 7.7 Relationships between Loading Rate, Shear Force and Bending Moment
- Problems
- Objective Questions
- Answers
- Chapter 8: Beams and Bending-Stresses
- 8.1 Simple Bending Theory
- 8.1.1 Flexural Strain
- 8.1.2 Flexural Stress
- 8.2 Moment of Inertia of Section
- 8.2.1 Rectangular Section
- 8.2.2 I and T-Sections
- 8.2.3 Circular Section
- 8.3 Shearing Stress in Beams
- 8.4 Distribution of Shearing Stress
- 8.4.1 Application to Rectangular Section
- 8.4.2 Application to I-Section
- 8.5 Composite Beams
- 8.5.1 Reinforced-Concrete Beams
- Problems
- Objective Questions
- Answers
- Chapter 9: Deflection of Beams
- 9.1 Introduction
- 9.2 Equation to Elastic Curve
- 9.3 A Cantilever Beam
- 9.4 A Simply Supported Beam
- 9.5 Rate of Loading and Elastic Curve.
- 9.6 Macaulay's Method
- 9.7 A Couple Acting Upon A Simply Supported Beam
- Problems
- Objective Questions
- Answers
- Chapter 10: Beam Deflection-Moment Area Method
- 10.1 Slope and Deflection from Bending Moment Diagram
- 10.2 Parts of BM Diagrams
- 10.3 Statically Indeterminate Beams
- 10.4 Fixed Beams
- 10.4.1 A Fixed Beam Under UDL
- 10.5 A Fixed Beam with Sinking Supports
- 10.6 BM Diagram for a Fixed Beam
- 10.7 Maximum Deflection
- 10.8 Continuous Beam
- 10.9 Advantages and Disadvantages
- Problems
- Objective Questions
- Answers
- Chapter 11: Strain Energy
- 11.1 Strain Energy due to Normal Stresses
- 11.2 Strain Energy due to Shearing Stress
- 11.3 Strain Energy under General State of Stress
- 11.4 Strain Energy due to Distortion
- 11.5 Strain Energy in Tension
- 11.6 Strain Energy of a Beam
- 11.7 Strain Energy in Torsion
- 11.8 Castigliano's Theorem
- 11.9 Tension due to Impact Load
- 11.10 Theories of Failure
- 11.11 Maximum principal stress theory
- 11.12. Maximum principal strain theory
- 11.13 Maximum Shearing Stress Theory
- 11.14 Strain energy theory
- 11.15 Distortion Energy Theory
- Problems
- Objective Questions
- Answers
- Chapter 12: Springs
- 12.1 Introduction
- 12.2 Close-Coiled Helical Spring-Axial Load Stress
- 12.3 Close-Coiled Helical Spring-Axial Torque
- 12.4 Strain Energy
- 12.5 Combination of Springs
- 12.6 Open Coiled Helical Spring
- 12.7 Laminated Spring
- 12.8 Flat Spiral Spring
- Problems
- Objective Questions
- Answers
- Chapter 13: Columns and Struts
- 13.1 Introduction`
- 13.2 Combined Bending and Direct Stress
- 13.3 Rectangular Section-Middle Third Rule
- 13.4 Middle Quarter Rule for Circular Section
- 13.5 Strut with Both Ends Pinned or Pivoted
- 13.6 Strut Fixed at One End and Free at the Other
- 13.7 Strut with One End Fixed and Other Pinned.
- 13.8 Strut Fixed at Both Ends (Ends Direction Fixed)
- 13.9 Euler Theory and Experimental Results
- 13.10 Rankine-Gordon Formula
- 13.11 Other Formulae
- 13.12 A Strut with Eccentric Load
- 13.13 Laterally Loaded Struts
- Problems
- Objective Questions
- Answers
- Chapter 14: Thick Cylinders and Spheres
- 14.1 Stresses in Thick Cylinders
- 14.2 Lame's Equations
- 14.3 Special Case of Solid Shaft
- 14.4 Strains and Displacements, Compound Cylinders
- 14.5 Thick Spherical Shells
- Problems
- Objective Questions
- Answers
- Chapter 15: Rotating Rings, Discs and Cylinders
- 15.1 Rotating Ring
- 15.2 Rotating Disc
- 15.3 Special Cases of Rotating Disc
- 15.4 Disc of Uniform Strength
- 15.5 Rotating Cylinder
- 15.6 Axial Stress in Rotating Cylinder-Hollow Cylinder
- 15.7 Axial Stress in Solid Rotating Cylinder
- Problems
- Objective Questions
- Answers
- Chapter 16: Curved Beams
- 16.1 Introduction
- 16.2 Stresses in Curved Beams
- 16.3 Determination of Eccentricity
- 16.4 Rings Under Load
- 16.4.1 Deflection of Rings in the Direction of Load
- 16.4.2 Deflection of Ring Under Transverse Load
- 16.5 Stresses in Rings
- 16.6 Chain Link
- Problems
- Objective Questions
- Answer
- Chapter 17: Vibrations
- 17.1 Vibrations Types
- 17.2 Simple Harmonic Motion
- 17.3 Linear Vibration
- 17.4 Transverse Vibration
- 17.4.1 Inertia of the Bar
- 17.5 Transverse Vibration of a Shaft Under its Own Weight
- 17.5.1 Several Loads on a Beam
- 17.6 Torsional Vibration
- 17.7 Torsional Vibration of Shaft Under Two Rotors
- 17.8 Helical Spring Under Torsion
- 17.9 Whirling of Shaft
- 17.9.1 Shaft Carrying a Single Rotor with Eccentricity
- Problems
- Objective Questions
- Answers
- Appendix: Theory of Elasticity
- A-1 Differential Equation of Equilibrium
- A.2. Solving Equations of Equilibrium
- A.3 Strain Components.
- A.4. Compatibility Equations
- A.5 Stress Function
- Multiple Choice Questions
- Answers
- Index.
